REMOTE CONTROL FOR WINDLASSES, THRUSTERS, DAVITS, DECK LIGHTS, ANCHORWASH
AutoAnchor 710 for control anywhere on the boat. See at a glance the length of anchor rode deployed.
Functions:
A system with one base station (6 outputs) can operate:
- 1 windlass plus a deck wash and deck light or other auxiliary functions
- or 1 windlass and 1 or 2 thrusters
Kit Includes:
- 1 console, 1 base station, 1 sensor, 1 magnet, load sensing connectors, installation and
operation instructions. Additional consoles, base stations and antennas sold separately.
FEATURES:
- Full windlass control and chain counting
- Controls bow and stern thrusters independently and together
- Preset the length of rode to deploy
- Auto stop and docking alarm when the anchor is close to docking
- Works with rope/chain or all-chain rode
- Logs windlass operating hours for maintenance
- Easy installation and set up on most windlasses
- Plug and play sensor installation
- Console unit is shockproof, waterproof and will float
- High level wireless transmission security with unique ID
- Safety lock reduces unwanted operation
- Ergonomic shape with rubber grip for wet conditions
- Console holder and protective cover
- Displays signal strength and battery level
- Use with DC, AC, Hydraulic and drum windlasses
- Operates in parallel with other control equipment
eg toggle switches, foot switches and other electronic controllers
- outputs in the base station – A single kit can be used for 1 windlass plus a bow and stern thruster
- Antenna plug is standard on the base station
- Automatic sensor detection – no need to select sensor in the set up
- Manual control alarm and stop at docking distance – stops the windlass during retrieval when using
manual and automatic operation
- Swap controls option in set up – this option means the Up button can be used as Out
and the Down button can be used as In
- Time out connection between the base station and the console now adjustable up to 20 minutes
- Dual speed windlass capability
- Options for windlass related actions, using the left and right arrow buttons – user selected and could
include a windlass stow, power cleats, deck wash, deck light
- Power enable option now available with off delay for hydraulic, AC, DC and PLC installations
AUTOANCHOR 710 WIRELESS REMOTE CONTROL AND CHAIN COUNTER
TECHNICAL SPECIFICATIONS
Power Supply |
2 X AA1.5V Batteries(RMS) |
Current Consumption |
N/A |
Output Maximum Current Draw |
N/A |
Output Minimum Current Draw |
N/A |
IP Rating |
IP67 |
Operating Temperature |
23oF to 140oF (-5oC to 60oC) |
Wireless Transmission |
2.4GHz ISM Band, IEEE 802.15.4 Compliant, 64 Bit Unique ID |
Wireless Range |
Typical Minimum 10m (30ft). Range depends on installation |
Default Safety Cut Out |
5 minutes after last key touch |
Outputs |
6 |
System Supports |
Up to 3 base stations and 3 consoles |
Rode – Chain Only |
Stainless or galvanised steel |
Rode – Rope and Chain |
Must have a minimum of 10ft (3m) of galvanised steel chain. Rope should be a good quality nylon anchor rope. Type 66 or equivalent |
EMC Protection/CE |
EN60945 |
For DC windlasses a dual direction solenoid is required.
Package Inclusions
AA710 Kit Includes::
- 1 console
- 1 base station
- 1 sensor with 2m cable
- 1 magnet
- Load sensing connectors
- Installation and operation instructions
Manual